Passing the spec MIL-DTL-5541

  • carl.dean
  • carl.dean's Avatar Topic Author
  • Visitor
  • Visitor
  • Thank you received: 0

Passing the spec MIL-DTL-5541 was created by carl.dean

Posted 5 years 1 month ago #4
I need some advice on good chemistry that would help us pass the MIL-DTL-5541 spec; we are coating aluminum 2024. Thanks
by carl.dean

Please Log in or Create an account to join the conversation.

  • richard.lewis4
  • richard.lewis4's Avatar
  • Visitor
  • Visitor
  • Thank you received: 0

Replied by richard.lewis4 on topic Passing the spec MIL-DTL-5541

Posted 5 years 1 month ago #5
Luster-On is a place you can check with. They have Aluminescent that works well. Also check Chemeon in Nevada. They have a new eTCP.
by richard.lewis4

Please Log in or Create an account to join the conversation.

Replied by ElectroLab on topic Passing the spec MIL-DTL-5541

Posted 4 years 5 months ago #57
If you are specifying to MIL-DTL-5541, you must use a product from the Qualified Product List (QPL-81706.) Check the QPD for approved products.
by ElectroLab

Please Log in or Create an account to join the conversation.

Moderators: admin
Time to create page: 0.501 seconds
Industrial adhesive tapes, silicone caps and plugs, molded parts, gaskets and seals, masking solutions, masking products
MacDermid Envio
Miles Chemical advertisement
Total Finishing Solutions
American Plating Power
Hubbard-Hall
uyemura
ProPlate
Hendor
Reliant Aluminum Products
Plating International
Gannon Scott
tri-mer
Fischer Technology
Alexandria Metal Finishing
Chemeon surface technology
Ronatec
Haviland