AC power supply 25V, 9600A, 480VAC, Air-cool, Pulse Power Supply RECTIFIER

  • admin
  • admin's Avatar Offline Topic Author
  • Administrator
  • Administrator
  • Posts: 50
  • Thank you received: 0
AC power supply 25V, 9600A, 480VAC, Air-cool, Pulse Power Supply RECTIFIERModel # CRS-Q5PPRB-25-9600-480-A-4x10-IOS ASKING PRICE:  $79,000.

This item was purchased Brand New from American CRS back in 2022 and has never been used.  It is currently still located at American CRS facility, and pickup will need to be scheduled by the Buyer.  Here are the specs on the rectifier: 
  • Output voltage:
    • DC Mode: 0-25V programmable in increments of 0.01 volts from 5-100% of rated output.
    • Pulse (ON/OFF): 0-25V programmable in increments of 0.01 volts from 5-100% of rated output
      • Pulse mode allows for a “pulse” value (high voltage) and a “base” value (low voltage) where the amplitude of the base value is not restricted or pre-defined as “zero”
  • Output current:
    • DC Mode: 9600A DC
    • PPR Mode: 9600A forward/9600A reverse, 9600A rms maximum
    • AC Mode: 9600A peak
  • Pulse specifications
    • Forward and Reverse time
      • 3ms – 200ms
      • Each are independently adjustable
    • Rest time
      • 1 ms – 200ms
  • AC Sinusoidal Mode
      • DC mode and AC Sinusoid
      • Forward/reverse times: 5-25ms (20-100Hz)
      • Forward/reverse times and amplitude are independently adjustable and need not be symmetrical
  • Input voltage: 480VAC +/- 10%, 4-wire, 3 phase with ground, 50/60Hz
  • Local controls via menu driven backlit 4 line LCD display
    • Programmable ramps, amplitude, and plating time in multiple phases of the process cycle
    • Voltage or current mode operation
    • Built-in amp-timer with dosing pump output
    • Digital Voltage and Current Display
  • Ripple
    • Voltage mode: < 3.5% of setpoint over output voltage range of 20%-100% of rated output voltage provided the output current is >5% of rated output current
    • Current mode: < 2% of setpoint over output current range of 20%-100% of rated output current provided the output voltage is >5% of rated output voltage
  • Efficiency:  87% across the entire operating range
  • Power Factor:  >94% across the entire operating range
  • Remote controls: IOS card via remote controller
  • Over current, over voltage, over temperature and low-line voltage pretection
  • Air-cooled
  • Enclosure Rating:  IP32
  • Configuration:  4x10-2i1RR1i2
  • Firmware:  Q080
  • Weight:  Four Towers each at 548 lbs
  • Size:  Four Towers each at 18” wide x 18” deep x 63” high
 For questions/inquiries please reach out to C.J. Nachtegall at (616) 871-6134 or email via This email address is being protected from spambots. You need JavaScript enabled to view it.
Last Edit:4 days 23 hours ago by admin
Last edit: 4 days 23 hours ago by admin.

Please Log in or Create an account to join the conversation.

Time to create page: 0.523 seconds