For over 50 years, platers have used three different components for electroless nickel baths: A, B and C.
Many still use these three components today. It’s inefficient, inconvenient and costly, but it’s just the way it’s always been done.
What if there was a better way? One Plate single component electroless nickel from Plating International replaces the three-solution system you use now with just one single solution that does everything your current system does, only better!
You can order, stock, make-up and replenish all from a single drum, not three. With One-Plate, there’s no chance of mixing up B and C components, because there’s only one with One-Plate. With One-Plate, there’s no chance for the bath to get out of balance, because all the ingredients are in the single One-Plate solution.
A single solution makes your plating process easier and faster. Save on inventory, labor time and energy. Experience consistently higher quality and longer bath life with One-Plate.
It’s available in low, mid and high phos, as well as composites with Teflon, diamond, silicon carbide and boron nitride.
In addition, Plating International is revolutionizing the hard chrome plating process with its new dry IBC tote technology.
If facilities are still adding dry chromic acid from the drum by hand, they could be exceeding PEL limits and potentially exposing personnel to hazardous fumes. Plating International’s new dry IBC tote technology is the future of chrome, revolutionizing everything we know about chromic acid.
“This dustless technique greatly reduces the risks associated with hexavalent chromium – both from a safety and environmental perspective,” says John Sullivan, Plating International’s national sales director. “It’s better for your employees, better for the environment and better for your bottom line.”
Visit www.platinginternational.com and visit us at Booth 124 at SUR/FIN.