Improvement of Charging Characteristics of Powder Coating
The charging characteristics of coating powders were improved for both corona-charging and tribocharging-type spray guns.
Powder Coat
- Colors: Orange Color
Study on the Anti-Corrosive Performance of Zinc Phosphate in Powder Coatings
Additives (pigments) such as zinc phosphate enhance the anti-corrosive properties of powder coatings, but their behavior in powder coatings has not been extensively studied.
TechTalk with Todd Gragg, IFS Powder Coating, on Low Cure
We spoke with Todd Gragg, IFS Powder Coatings' Heat Sensitive Substrates Manager, about new products and developments in the low cure powder coating area.
True Believers Compass Powder Coating Adding MDF/Wood to Broaden Appeal
Seeing is believing when it comes to Compass Powder Coating’s Mike Tashash.
Powder Coating Performance on Steel
Powder coating aluminum is pretty straightforward.
Anchor Bay Powder Coat Manages Growth Through Improved Shop Efficiencies
When owner Rob Thomas looks at his management team at Anchor Bay Powder Coat in New Baltimore, Michigan, he sees several people who have played a big role in the success of his company.
TechTalk with Tim Brinner, IFS Coatings on Thermoplastics
We speak with Tim Brinner, Vice President of Thermoplastics at IFS Coatings, about their various products and how applicators are using them.
Powder Coatings and AAMA: How to Meet the Specifications
Talk to anyone in the performance coatings industry in North America, and they will probably start talking about the AAMA specs pretty quickly.
AR Powder Coating Earns Certs Through Training and Persistence
AR Powder Coating’s Tony Sclafani has his own take on what the 5P idiom means when it comes to running his company’s powder coating division.
AR Iron’s Powder Coating Division Achieves AAMA 2604 and AAMA 2605 Certification
AR Iron’s powder coating division has achieved AAMA 2604 and AAMA 2605 certifications.
Powder Coating Audit Helps Key-Link Improve Processes
Jason Pugh was in the powder coating industry for only a few months before his company — Key-Link Fencing and Railing — presented him with a huge challenge.
Not All Powder Coatings are Created Equal
Are all powder coatings created equal? The simple answer is no.
9 Photos
Prime Powder Coating’s New Facility Goes Bigger, Better
The crick in Cory McCabe’s neck is starting to wear off after several months of looking up at the new powder coating system being installed in his company’s new facility.
Powder Coating Brings Fabricators Out of the Boonies
How Justin and Jayna Roy ended up opening a design, metal fabrication, and powder coating company in Eddystone, Pennsylvania, may take some time to explain, but it’s well worth it.
Keeping Order in Your Powder Coat Shop
A powder coating facility can be a hectic, at times chaotic, place to work.
9 Photos
With Help from ‘Friends,’ Accurate Metal Fabricating Adds Powder Coating
It’s always good to have a few friends in the powder coating industry to call on when you need a quick answer.
Why Powder Coating Consistency is Vitaly Important
When it comes to powder coating, it is satisfactory when a substrate is pulled out of the curing oven without visual imperfections and with the perfect mils.
