Overview of Electronics Surface Finishes
Surface finish R&D departments on the supplier side have been very busy developing new finishes to meet the ever-changing demands of the electronics industry.
Surface finish R&D departments on the supplier side have been very busy developing new finishes to meet the ever-changing demands of the electronics industry.
Saporito Finishing’s Jeff Logan is a strong believer in the 80/20 principle of running a business.
Finishers using hexavalent chromium in California have less than two weeks to respond to amendments to the California Air Resources Board proposal to phase out existing facilities over the next 10 years.
The American Chemistry Council is strongly concerned with EPA’s draft Integrated Risk Information System (IRIS) assessment for hexavalent chromium.
The Surface Finishers Educational Association will host an online presentation on April 13 on “Parts Handling In Electroplating - Rack, Barrel, Hoist, Hand-Wire.”
The U.S. Environmental Protection Agency will be sending a PFAS questionnaire to electroplaters to collect data for the agency’s planned revision of the metal finishing and electroplating guidelines.
Nathaniel Fowler is the Day-Shift Supervisor for Electro-Spec Carolina in Lexington, South Carolina.
Hard chromium plating bath chemistry has advanced through several stages since its introduction in the late 1920s.
Loreto “Larry” Capoccia came to the U.S. from Italy with his wife in 1966 and soon found a career in the metal finishing industry.
The U.S. Environmental Protection Agency (EPA) has $16 Million available for Pollution Prevention (P2) grants.
A finishing operation with a single automatic plating line was having trouble with how its team was racking parts.
Juana Chavez-Rangel is a Production Manager with Saporito Finishing in Cicero, Illinois.
Cyanide is cytotoxic for animals and humans, inhibiting the cytochrome oxidase enzyme and preventing the transport of oxygen into the cells [1].
When John Lindstedt entered the Navy several decades ago, he was selected for the Nuclear Propulsion Program in support of the submarine program.
Lonnie Harder doesn’t talk in grandiose terms about all that he wants to add or change about his Florida metal finishing company, ElectroLab II.
Pioneer Metal Finishing Michigan location selected Ribbons of Monroe as its 2022 fundraiser recipient.
A federal workplace safety investigation of an El Paso jewelry metal-plating finisher found the company again exposing workers to serious hazards.
In view of some new environmental directives, hexavalent chromium baths can no longer be used to electroplate thick hard chromium deposits.
The U.S. Environmental Protection Agency (EPA) is deleting the River City Metal Finishing Superfund site in San Antonio, Texas, from the National Priorities List (NPL) of Superfund sites.
A Japanese bus maker has canceled an order from a Chinese electric vehicle manufacturer after learning that hexavalent chromium was used on some parts of the vehicles.
Aviation Repair Solutions owner Jim Meyer wrote 27 letters to the California Air Resources Board when it proposed banning hex chrome finishing in the state.