Huw Williams is General Manager for SERFILCO, a position that brought him to the U.S. from the U.K. in 2012.
Electropolishing has been in commercial use since the 1950s, and it continues to be a very popular surface finishing process, geared to achieving specific surface treatments on a wide variety of metals.
The U.S. Environmental Protection Agency on Sept. 8 released its Preliminary Effluent Guidelines Program Plan 15 to undertake three new rulemakings to reduce contaminants including per- and polyfluoroalkyl substances (PFAS) and nutrients from key industries, including metal finishing.
Florida Finishers Corp. will hold its 10th Annual Mid-Winter Conference and Exposition January 27-28 at the St Petersburg Marriott Clearwater.
Uniformed Army leaders and Civilians ceremonially opened two new facilities at Crane Army Ammunition Activity on September 2.
The Metal Finishing Association of California’s annual Fall Outing and annual meeting will be October 8-10.
Element Solutions Inc., a global and diversified specialty chemicals company, has closed its previously announced acquisition of Coventya Holding SAS, a global provider of specialty chemicals for the surface finishing industry.
There are few simple, direct methods for determining when to replace a cleaner on the plating line.
Nickel plating, in its various forms and applications, continues to be a workhorse of the metal finishing industry.
Michael Feldstein is President of Surface Technology, Inc., an innovative force in the metal finishing industry for decades with over 100 U.S. and foreign patents, with more pending.
When Aircraft X-Ray Laboratories president Justin Guzman was bemoaning a few years ago the amount of wastewater treatment sludge his anodizing, painting, and conversion coating facility was generating each month, he was simply looking for a sympathetic ear.
Trivalent chromium or tri-chrome tends only to cause issues when it reaches approximately 0.5-1 opg or about 1-3 percent of the average total chromic acid figure, often ~33 opg.
The NASF Palmetto Chapter’s annual Myrtle Beach Technical Conference will be Oct. 6-8 at the Hampton Inn and Suites Oceanfront Hotel.
Justin Guzman is president of Aircraft X-Ray Laboratories in Huntington Beach, California, and is also the president of the Metal Finishing Association of Southern California.
When David Huber got the idea in 1959 to start a finishing company that could help solve everyday engineering problems related to wear and corrosion of metallic substrates, he didn’t have to think long about what to call it.
Registration is open for the NASF Michigan chapter Midwest Seminar to be held September 17-19 at the Grand Hotel in Mackinac Island, Michigan.
Chicago Midwest Chapter of NASF is holding its 2021 Leadership Summit in Lake Geneva on October 13 and 14.
Controlling and dosing electrolytes is a key challenge in the operation of electroplating process chains. Electrolyte components are continuously degraded and dragged out during the production process.
Joelie Zak is co-owner of Scientific Control Laboratories, president of Admiral Environmental, and a Master Surface Finisher.
Q: How do I ensure my topcoat or sealer not only maintains its cosmetic quality, but also its corrosion resistance?
A finisher routinely pumps out their electroless nickel (EN) solution to strip and passivate the tank. However, they recently removed the bath at the end of the production day, and when they brought it back into the tank, the solution was clear.
