Electroplating nickel-63, a radioactive isotope used in betavoltaic batteries and random number generators, requires precise control due to its limited availability and the generation of radioactive waste.
Greensboro Industrial Platers in North Carolina has acquired United Metal Finishing, also located in Greensboro.
As we close 2024, the Metal Finishing Champions Group (MFCG ) of the City of Los Angeles Sanitation and Environment (LASAN) wishes all metal finishers within the city a prosperous 2025.
Aalberts N.V. has agreed to acquire 100% of the shares of Paulo Products Company (Paulo), operating five facilities in the USA and one in Mexico, generating an annual revenue of approximately USD 105 million with 522 employees.
Michigan Attorney General Dana Nessel announced a settlement in a lawsuit involving former Keeler Brass Company sites to address contamination, including volatile organic compounds (VOCs), such as trichloroethylene (TCE), and per- and polyfluoroalkyl substances (PFAS), at facilities in Western Michigan.
DeKalb Metal Finishing in Auburn, Indiana, plans to move into a new facility soon.
Planning is a critical function of leadership and management. However, small companies can neglect it because they lack knowledge, not desire.
Reliable Plating Works and Advanced Plating Technologies are about 9 miles apart in the city of Milwaukee, which — in other cities across the U.S. — would be comparable to the Korean Demilitarized Zone regarding friendships amongst finishers.
Surface treatment technologies are pivotal across diverse industrial sectors such as mechanical engineering, electrical engineering, and the automotive industry.
We chatted with Dan Zinman from Miles Chemical on various topics about surface finishing.
The prices for metal anodes and metal salts have increased substantially, with little stability over the years.
The piston rod of the hydraulic jack was a kind of artillery alloy structural steel of 40Cr and its surface was the chromium plating layer.
Amidst the flood waters, the ensuing mud, and the almost unfathomable damage caused by Mother Nature, Mike Mullaney has seen the light at the end of a very dark tunnel.
A plater wrote to me in regard to recently experiencing some serious corrosion failures that were found to be caused by “macro-cracks” in the chromium.
Researchers at Colorado State University have found a new approach for breaking down PFAS – a group of human-made “forever” chemicals commonly used for their water-resistant properties that can carry health risks from long-term exposure.
It took Matt Lindstedt nearly 10 years to determine whether his new direction with Advanced Plating Technologies was working.
We talked with Joe Zabielski from Ronatec about the new Paladin high-phos electroless nickel chemistry, which the company says offers outstanding corrosion protection and hardness.
Deposit pitting is likely the most troubling defect that can be experienced when plating hard chrome.
If you’re a surface finisher working with the Department of Defense (DoD) or thinking about it, you’ve likely heard about Cybersecurity Maturity Model Certification (CMMC).
We spoke with Asa Halliday of Tri-Mer about designing and operating an effective exhaust system for facilities with finishing lines, including scrubber maintenance.
In recent years, magnesium (Mg) has evolved as a salient material, in affiliation with electroless nickel (Ni) coating, which have found applications in automobiles, aerospace and confederate fields attributing to its excellent inherent weight sensitive properties.
