Bill Nebiolo from REM Surface Engineering speaks about the 2022 Technical Conference at the NASF SUR/FIN Conference, which will be held June 7-9 in Rosemont in ...
Paul Springer was fresh out of college in the early 1970s and enjoying a career at Diamond Shamrock, where he helped create Dacromet, one of the first products that used a zinc and chromium coating ...
Matt Lindstedt is not afraid to fail. The president of Advanced Plating Technologies in Milwaukee learned that from his father, CEO John Lindstedt, who also had the same attitude he inherited from ...
On Monday, September 28, Fox 6 visited Reliable Plating Works, Inc.’s Elite Finishing LLC Division to do a story on electroplating and their new Custom Chrome ...
Years ago, Tamea Franco was a typical entrepreneur in Roanoke, Virginia, she spent a lot of time in her basement with numerous buckets of chemicals and sheets of aluminum performing anodizing ...
While the history of electroplating is very rich and interesting, the environmental impact of the wastewater generated from the process can not be overlooked. In 1972 the Clean Water Act came into ...
Tens of thousands of scientists and engineers work in U.S. Department of Defense (DoD) labs inventing technologies that benefit the U.S. defense mission and the American public. This is the story of ...
Watch the video above to go inside Perfection Industrial Finishing.
Chuck Zinke’s passion for coatings started many moons ago as a teenager, when he would rebuild cars and trucks in his ...
Profitability and first-pass transfer efficiency are vital to any finishing operation. Ground is critical and there is a huge difference between thinking you have a good ground and knowing ...
