It may be a reach to say that the DECC Company in Grand Rapids, Michigan, saved rock and roll music, but stay with us on this one. Suffice to say, it was founder Evert Mellema’s ingenuity more than 56 years ago that kept many jukebox’s humming along, as well as dust and dirt free.
The process of 5S can be systematically applied to ones plating shop as easily as it applies to Boeing Aircraft or Daimler Chrysler.
Like her grandfather who started General Magnaplate almost 70 years ago, Ashley Saunders Russo is a bit of an entrepreneur herself.
Adam Brumfield is the Director of Business and Product Development Roy Metal Finishing in Easley, South Carolina, one of the largest finishing operations in the U.S.
Zinc flake coating is a generic term for coatings and is used by several chemical providers globally. Zinc flake, by design, will lay and overlap on the products when coated. This allows for a blend of zinc flakes to formulate a uniform coating coverage. This specific coating is relatively thin (8-12 µm) and will produce a high level of corrosion protection for any part.
Meghan Bates is the Vice President at Luke Engineering in Wadsworth, Ohio, which specializes in anodizing and conversion coatings for the light metals of aluminum and magnesium.
A walk through the sprawling 175,000-square-foot campus that is Durable Industrial Finishing Co. (DIFCO) in Tucker, Georgia, will tell you all that you need to know about how automated the operations are at this 60-year-old finishing operation.
Milt Stevenson Jr. is Vice President and Chief Environmental Officer at Anoplate in Syracuse, New York, which he runs along with his brother, Jim. It was founded by their father in 1960 and operates in a 104,000-square-foot facility. Milt is an active member of the finishing industry and its association, and in 2019 was named an NASF Fellow for his life-long work and dedication to the industry.
Duke Vo is Sales Manager at Temecula Quality Plating in Temecula, California, and previously served in the U.S. Army.
For metal castings and powder metal parts exposed to harsh, high-pressure, or vacuum environments, holes and fissures are unavoidable.
Staying engaged with its customers is important to Coventya USA, so during these pandemic times where travel is limited or restricted, the supplier to the finishing and coating industry has developed a program to improve the knowledge of its customers.
Jaime Maliszewski is president and CEO of Reliable Plating Works and general manager of Elite Finishing in Milwaukee, a family-owned company that has been around since 1929. Not only does he lead one of the top industrial chrome plating shops in the U.S., but Maliszewski and his employees are actively involved in a number of community organizations.
Traditionally, most chrome baths use lead anodes. When we think of lead anodes, we usually just think about the lead part, but in fact, the lead anodes that are used are never made of pure lead.
Keith Eidschun is the owner of Freedom Metal Finishing in Clearwater, Florida, as well as co-owner of Analytical Specialties Incorporated. The shop was originally known as Dixie Plating and has been in business since 1944 across three generations. Eidschun has been the owner of the Nadcap shop since, which is when he changed the name to Freedom in 2009 to include their painting, silk screening, and powder coating capabilities.
When you visit Allied Finishing in Grand Rapids, Michigan, you won’t find the owners of the company sitting in a corner office shuffling papers. Chances are you’ll need to venture to the shop floor to find either Brad Hirdes, Marc Hop, C.J. Nachtegall, or Jerry VanderSloot.
Monique Guyse is a Senior Sales Perfectionist at Plateco, a third-generation shop based in Reedsburg, Wisconsin. She is responsible for sales, customer care and quality control. A graduate of the University of Wisconsin-Oshkosh, Monique started her Plateco career in the Accounts Receivable area, then moved into sales and operations, serving as sales engineer, technical sales engineer, and quality systems manager before being promoted to her current position.
On Monday, September 28, Fox 6 visited Reliable Plating Works, Inc.’s Elite Finishing LLC Division to do a story on electroplating and their new Custom Chrome department.
Greg Wood is owner and chief executive officer of Alpha Metal Finishing in Dexter, MI. A Michigan State University grad with a degree in human resources. He handles the shops operations, sales and marketing, and technology, and has a passion for leadership and developing a healthy organization.
Control Electropolishing in Brooklyn, New York, has been in business for over 60 years, and one thing has remained fairly consistent in that time: a commitment to excellence in how they electropolish parts, and the chemical solutions that they use to get there.
The National Association for Surface Finishing is holding a Web-Based Chromium Plating for Engineering Applications Course in November.
When it comes to aerospace parts, less is often more, especially considering the weight of the part. That is one reason Signature Plating in Cibolo, Texas, decided to launch a plating-on-plastic (POP) line several years ago to assist in helping private planes reduce weight and gain fuel efficiencies.
